Spray foam insulation
Spray foam fills and seals in one pass, so it earns its higher cost where ductwork runs through a hot attic or a metal building has nothing else holding its temperature.
Insulation Contractor in Anthony, NM - Attics Sealed Before They're Filled
Prime Las Cruces Spray Foam Insulation is an insulation contractor based in Las Cruces, NM. In Anthony, we insulate attics, walls and crawl spaces, seal the gaps that let hot air in, and pull out old insulation that's past saving.
Prime Las Cruces Spray Foam Insulation handles the full range of insulation work in Anthony, from topping up a thin attic and sealing drafts to spraying foam in a metal shop and clearing out a crawl space. I come out and look at what's already in your house before I quote, because that decides what the job should be.
Insulation work on Anthony homes and shops
Most calls from Anthony start the way they do across the cities around Las Cruces: a room that won't cool down, the room over the garage nobody wants to sit in, cold floors, or a power bill that keeps climbing. Behind most of those is an attic or crawl space that's been left alone a long time, and that's where I start looking.
Anthony also has its share of shops, offices and metal buildings, and their owners call for the same reasons, a space that won't hold its temperature or a cooling bill that's out of line. A bare metal wall needs a different fix than a house attic, and I'll explain the choice once I've seen it. We do this same work across the state line in Canutillo, TX and over in Chaparral.
- Based in
- Las Cruces, NM 88005
- Hours
- Mon–Sun: 7 AM–10 PM
Insulation services we offer in Anthony
Attic insulation
When a room stays hot or the power bill keeps climbing, the attic is usually the first place we look, and we measure what's already up there before adding anything.
Blown-in insulation
Blown-in insulation, loose fill sent through a hose, is how we top up an attic that's settled thin, keeping it even out to the edges instead of piled in the middle.
Home insulation
If the whole house feels drafty, we look at the attic, walls and crawl space together and tell you which one to fix first and which can wait.
Insulation removal
Old insulation soaked by a roof leak or fouled by droppings comes out before anything new goes in, because fresh material on top just hides the problem.
Crawl space insulation
Cold floors often trace back to an open crawl space, and insulating under the floor keeps it closer to the temperature of the room above.
Wall insulation
Walls in older houses sometimes have little or nothing inside them, and we fill them through small openings that get patched once the cavities are full.
Air sealing services
Air sealing means closing the gaps around pipes, wires and openings before insulation goes in, so the new material isn't fighting a steady draft.
Basement insulation
Where a house has a basement, the walls and the rim where the framing meets the foundation lose heat, and insulating them helps the rooms above stay steady.
Closed-cell foam insulation
Closed-cell foam, a dense foam that blocks moisture, suits crawl spaces, rim joists and metal walls where you need a seal and a moisture block in one layer.
Open-cell foam insulation
Open-cell foam is softer and lighter, a good fit for attic rooflines and interior walls where you want the air sealed and some sound deadened too.
Commercial insulation
Shops, offices and metal buildings get the same hard look before we quote, and on bare metal walls we usually reach for closed-cell foam because it also keeps condensation off.
Crawl space vapor barrier
A vapor barrier laid over the crawl space dirt keeps ground moisture from rising into the floor framing and the insulation tucked up under it.
Vapor barrier installation
We put vapor barriers where moisture would otherwise soak into insulation and leave them out where they'd trap it, which depends on the wall and which side the barrier sits.
Attic air sealing
Can lights, plumbing stacks and the attic hatch are the usual leaks, and we seal them before any insulation goes down so the attic holds what you're paying for.
Retrofit insulation
Retrofit work adds insulation to a finished house without tearing it apart, usually from the attic or through small openings we close up when we're done.
Get a free insulation estimate at your Anthony home
We reply within one business day to set a time, and I come out to Anthony myself to look at your attic, walls or crawl space. The estimate is free, it's done on site, and there's no obligation to go ahead.
(575) 222-9021Permits, licenses and pricing for insulation in Anthony
In Anthony, the city's Building Inspections Department reviews the building permits city code requires for all construction inside the city. Whether your insulation job falls under that is something I confirm with the city for your address before we start. If it does, we apply for it, set up the inspections and keep you posted, and the work starts once the permit is in hand.
There are two things you can check about anyone you hire here. The state's Construction Industries Division licenses contracting companies, and a license covers only the kind of work in its classification, so ask what it's for. The city also has new businesses apply for a business license before doing business there, $40 for each location for the calendar year. Ask any contractor you're considering about both.
What moves the price is mostly what's already in your house: how much insulation is up there, whether it has to come out, how many gaps need sealing and which material fits. The schedule turns on the same things plus the permit question. My written estimate lays out each step of the job so you can see what you're paying for.
Why we fix the problems before we insulate
I learned insulation under an old-school boss who made me tear out and redo anything that wasn't right, and I started this business in 2023 after years on his crews. I still work in the order he taught me. Insulation laid over a problem nobody fixed is money thrown away, so I'd rather tell you a job isn't ready yet than do it wrong.
I do the estimate visit myself and tell you plainly what I saw and what I couldn't get to. Our crew does the work, and I run each job and check it before we leave, making sure every gap we marked is sealed and the depth is even across the attic. We're licensed and insured, and the work is backed by our satisfaction guarantee.
If you've got a hot room, a drafty floor or an attic nobody has checked in years, call (575) 222-9021 or use our form and tell me what you're noticing. Which rooms bother you and at what time of day helps me know where to look first when I come out.
What changes the work on Anthony jobs
A few things come up again and again when we insulate in Anthony. One comes from state permit rules, and the rest come from what we find once we're up in the attic or under the floor.
Wiring and ducts need their own permits
State rule treats electrical and mechanical work as separate permits from the building permit. That matters on insulation jobs because the attic is where old wiring and ductwork live. If I find a splice sitting outside a box or a duct that's come apart, it gets fixed by the right licensed trade, under its own permit if one's needed, before we bury it under new insulation.
Thin edges and buried vents
In a lot of attics the insulation is deep in the middle and thin out at the edges, where the roof sits closest to the ceiling, which is backward. Piling more on can also bury the eave vents, and then the attic can't breathe and moisture starts showing in the framing. We keep those vents open and bring the edges up to the same depth as the rest.
Crawl spaces under cold floors
When the floors feel cold, the crawl space under the house is usually why. We look at what's down there before picking a fix, because insulation under a floor does little good if ground moisture keeps soaking it. Sometimes the right first step is a vapor barrier over the dirt, and the insulation goes in after that's done.
Old roof leaks in the insulation
A dark, matted patch in the attic insulation usually means the roof leaked at some point. I check whether it's still wet and whether the leak was ever fixed, because new insulation over an active leak just soaks up the next one. If the roof needs work first, I'll tell you, and we hold the insulation until it's done.
Questions Anthony homeowners ask about insulation
How much does it cost to insulate an attic in Anthony, NM?
The cost depends on what your attic needs, so I give you a written number after I've been up there. A clean attic that only needs its gaps sealed and a top-up of blown-in sits at the lower end. Pulling out ruined material, sealing a lot of openings or choosing spray foam all push it higher.
How long will the insulation crew be in my attic?
Most of the crew's time goes into the prep, not the new insulation. Pulling out old material and sealing gaps around lights, pipes and the hatch take longer than blowing in fresh fill, so an attic that only needs a top-up moves along quickly. Once I've seen yours, I'll tell you what to expect.
Do we have to leave the house when you spray foam insulation?
Yes, plan to be out while foam is sprayed and until the re-entry time has passed, which is the wait the foam maker sets before people and pets go back inside. I'll give you that time for the product we're using before the day. Blown-in work is different, and you can usually stay home.
How do I get my house ready for attic insulation?
Clear a path to the attic hatch and move anything stored under it or up in the attic, so we can reach every corner. Keep pets in a closed room for the day, and tell me about any roof leaks or rooms that have always run hot. We lay down covers inside and clean up before we leave.
Is spray foam or blown-in insulation better for my attic?
For most attics, sealing the gaps and topping up with blown-in is the better buy. Foam costs more and seals air while it insulates, and that earns its price when your ductwork runs through the attic, because foam on the roofline keeps those ducts out of the heat. I'll tell you which one your attic calls for and why.
Can I do my own electrical work in Anthony before insulating?
Only after you pass the exam the state requires for that kind of work. State rule lets a residential property owner get a homeowner's permit within set limits, and the state's residential permit guide says electrical work by a homeowner comes after the required exam. If I find wiring that needs attention, I'll point it out before we insulate.
Service areas
Call or write to set up a visit
Our hours run 7 AM to 10 PM every day, so you can call (575) 222-9021 after work or send the form whenever it suits you.