Rooms hot all summer or chilly along the outside walls? We fill the empty space inside your walls so the house holds its temperature.
Wall insulation in Las Cruces means filling the space inside your exterior walls, or adding a layer on the outside, so rooms hold their temperature and less outside noise gets in. For most finished houses we do it without tearing out any drywall.
Most wall calls start with one room. It's the bedroom that's still warm at bedtime, the wall that feels warm to your hand on a summer afternoon, or the power bill that climbs every July. In a lot of older houses the cavities between the studs, the hollow spaces inside a framed wall, were left empty or got thin fill that settled long ago.
The price comes down to how much wall we're filling, whether we get in from inside or outside, and what has to be fixed before any insulation goes in. Built-in shelves and cabinets add work. The schedule turns on the same things, plus a permit if the job needs one. You get a written estimate that lists each step in order, so you can see what you're paying for.
Blown-in wall insulation only does its job if it goes in carefully, inside a wall nobody can see into. These are the things I look at, and the ones worth asking any installer about.
Blown-in fill has to fill each cavity completely and go in dense enough that it won't settle. When loose fill settles, it leaves an empty band at the top of the wall, and that's where the hot spot stays. We fill each cavity full, including the short ones under windows and over doors.
Walls with built-in shelves or cabinets usually need entry holes in different spots to reach behind them. Some houses also use a wall cavity to carry heating or cooling air, and that cavity has to stay empty or you'll choke off the air to that room. I mark both when I look over the house.
Older drywall and plaster can have soft spots, and packing insulation behind them can push them out. The usual fix is to reinforce the weak spot first or fill that cavity at lower pressure. Whoever you hire for this, ask how they handle it before they start drilling.
Here's how a wall job goes from your first call to the last patch, and who you'll be dealing with at each step along the way.
Call (575) 222-9021 or send the form and tell us which rooms bother you and roughly how old the house is. We get back to you and set a time for me to come out.
I come out myself, check the walls inside and out and write down what I see, including anything that needs repair before insulation goes in. You get a written estimate that lays out each step in order.
If the job needs a permit, we take care of it, and the city processes residential permits within 0 to 3 business days. Then our crew covers your floors and plants, drills and fills each cavity full.
We patch the holes and clean up, and I go over the finished work myself before we pack up. If something isn't right, I'd rather catch it then than have you find it later.
Order matters more than anything on a wall job. I learned under a boss who made me tear out and redo anything that wasn't right, and that lesson stuck. Insulation over a leak, bad wiring or gaps nobody sealed is money thrown away. If I find one of those, I'll tell you the wall isn't ready yet and what needs fixing first.
Drafts come next. Air slipping in around outlets, windows and the top of the wall carries heat right past new fill, so we often pair this job with air sealing services, which close those gaps before the insulation goes in. If the cold is coming up from below the living space, that's a different job, and basement insulation may be the better place to start.
For closed walls, we cover your floors and plants, drill small holes into each cavity, fill every cavity full and patch the holes neatly. We don't stop at the easy bays, because a skipped one under a window is where the hot spot stays. When the siding comes off cleanly, I usually prefer to work from outside, because your rooms stay clean and you can go about your day.
Going in from outside keeps the dust out of your rooms. Shrubs get covered first, and where siding has to come off to reach the wall, it goes back on neatly when the cavities are filled.
Going in from inside makes sense when the siding is hard to remove or you'd rather not disturb it. The trade-off is dust, so the drilling needs shrouds on the drill and plastic sheeting hung floor to ceiling.
We respond within 1 business day. The estimate is free, done in person and obligation-free. After you send the form, we call to set a time, I come out to look over your walls, and you get a written estimate with each step laid out in order.
(575) 222-9021The City of Las Cruces handles permits for home projects. Whether a given wall insulation job needs one is the city's call, so before work starts I check with the office that covers your address. If yours needs a permit, we apply for it, set up the inspections and keep you posted on where it stands.
New Mexico's residential energy code puts Las Cruces in climate zone 3B, so whoever insulates your walls should know what that code expects of houses here. The state's Construction Industries Division licenses insulation work, and its public license search lets you confirm a contractor holds a valid license before you hire anyone.
We're based in Las Cruces and do the same work in the cities around it, including Chaparral and Anthony. Wall calls here usually come from west-facing rooms that soak up afternoon sun and stay warm into the night, and from houses where nobody knows what, if anything, is inside the walls.
I do every estimate visit myself, and I look hard at the walls before I put a number on anything. I'd rather tell you up front what has to be fixed first than find it halfway through the job. Our crew does the work, and I run each job and check it before we leave your house.
I started this business in 2023 after years on another contractor's crews, so we've been working under our own name for 3 years. We're licensed and insured. Our work is backed by our satisfaction guarantee. If that sounds like the way you want your walls done, call (575) 222-9021 or send us the form.
Sealing the gaps around outlets, windows and wall tops keeps outside air from cutting through walls you've just paid to fill.
If your floors stay cold or the lower level never feels comfortable, the basement may need attention before the upstairs walls do.
We're based in Las Cruces, NM and do wall insulation across the cities around it, including Chaparral, Anthony and Canutillo, TX. If your city isn't listed here, call and ask.
Installing blown-in wall insulation usually runs about $4 to $4.50 per square foot across the US, and that's a market figure, not our price. Your cost depends on how much wall we're filling, whether we work from inside or out, built-ins and any repairs needed first. The written estimate lists each step so you can see what you're paying for.
Yes, in most framed walls with empty cavities. Blown-in insulation, loose fill blown through a hose, goes in through small holes and works into odd-shaped, hard-to-reach cavities. Batts, the rolled blankets, can be very cost effective too, but mainly when a wall is already open and the cavities are a uniform size that matches the batt.
The best time is when you're already putting on new siding. An unbroken layer outside the framing, carefully taped against air leaks, costs only a little more than the siding itself, its energy savings often pay back in 5 to 10 years, and the comfort and quiet show up right away. If siding is on your list, I'll talk it through with you.
In New Mexico, insulation work falls under a license classification called GS-1, issued by the state's Construction Industries Division, and it covers installing any insulating material in or on a building. Before you hire anyone, run their name through the state license search linked above so you know their license is valid.
Move furniture a few feet away from the walls we're filling and take down pictures, shelves and mirrors hanging on them. If we're working from outside, pull back anything stored against the house. We cover your floors and plants ourselves, so you don't need to worry about that part.
The time comes down to how many walls we're filling, whether we work from inside or out and whether anything needs fixing first, so I won't guess before I've seen the house. If a permit is needed, that comes before the crew starts. Your written estimate lays out each step in order, so you'll know what happens when.
We answer (575) 222-9021 seven days a week from 7 AM to 10 PM, so call when it suits you and mention any siding plans, and I'll know what to look at when I come out.
