Hot rooms upstairs, drafts at the ceiling or a noisy house? We spray foam that seals the gaps and quiets the space.
Open-cell foam insulation is a soft, low-density spray foam we apply in attics, under roof decks and inside wall cavities in Las Cruces homes, where it fills the gaps, slows heat and quiets the rooms below.
Most people who call us have a hot room upstairs, a cooling bill that keeps climbing or an attic nobody's looked in for years. Open-cell foam fills the cavity it's sprayed into, and its cells stay a little open, so it flexes with the framing and can dry out instead of holding moisture. We're based in Las Cruces and work across the cities around it.
The price mostly comes down to how many square feet we spray, how thick the foam goes and what has to be fixed or pulled out first. The schedule turns on those same repairs and on any permit the job needs, so before work starts I check with the office that covers your address. Your written estimate lists each step in order, so you can see what you're paying for.
Three things about your house change which foam makes sense and what the job costs. I look at each one on the estimate visit and write down what I find.
If your heating and cooling unit and its ducts run through the attic, foam sprayed under the roof deck pulls them inside the house's insulated shell. Less heat gets lost through the ducts, and any air leaking from them still ends up in your rooms, so this is where foam earns its keep.
We check how many inches of old insulation you have and what shape it's in. Material that got soaked or is full of droppings comes out first through our insulation removal work, because anything laid against it just keeps the problem in your house.
Insulation over a roof leak or bad wiring only hides it, and that's money thrown away. If I see stains, damaged wire or open gaps around pipes, can lights and the hatch, I write it down and tell you plainly what has to be fixed before we spray.
Here's how a job runs from your first call to the final check, in the order it happens. I'm at your house for the first look and again for the last walk-through.
Reach us at (575) 222-9021 or through the form and tell us which areas you want foamed. We get back to you and set a time for me to come out.
I come out myself, look over the attic, walls or crawl space and note what I see, including repairs that have to come first. You get a written estimate that lays out each step in order.
If the job needs a permit, we apply for it, set up the inspections and keep you posted on where it stands. Once repairs are done and the gaps are sealed, our crew sprays the foam.
I go over the finished work myself before we pack up, looking for thin spots at the edges and anything missed around pipes, lights and the hatch. Then we clean up and walk you through what was done.
Open-cell is the lower-priced foam, and it quiets a room much better than closed-cell foam, the dense kind that blocks moisture. The catch is that open-cell lets moisture vapor pass, so it can't be the layer that slows moisture moving through a roof or wall. We talk through whether that matters in the spot you want foamed before anything gets sprayed.
I learned this trade under an old-school boss who made me tear out and redo anything that wasn't right, and I still work the way he taught me. Anything I flag on the visit gets fixed before the foam goes in, so nothing ends up hidden behind it. I'd rather tell you a job isn't ready yet than spray over a problem.
If the spot is a crawl space where moisture from the ground is the real trouble, open-cell won't fix that alone, and a crawl space vapor barrier usually comes first. People who run shops, offices and metal buildings get the same look-first approach through our commercial insulation work, done in the same order.
When your ducts and unit live in the attic, foaming the underside of the roof is the option I lean toward. It costs more than loose fill, and in that house it's usually worth it.
When nothing mechanical sits in the attic, sealing the gaps and topping up blown-in insulation, loose fill blown through a hose, usually gets you more for the money. We'll say so if that's the better call.
Send the form and we'll get back to you within one business day to set up a free estimate at your house, with no obligation. I come out myself, look over the space and write out each step of the job so you can see what you're paying for.
(575) 222-9021In Las Cruces, the city issues permits for most building projects after reviewing an application, and applications go through the city's Citizen Portal. Whether your foam job needs one isn't settled until someone checks for your address, so I do that before work starts. If a permit is needed, we apply for it, set up the inspections and keep you posted.
Contractor licensing is a state matter. New Mexico's Construction Industries Division licenses contractors and requires a license for anyone doing or offering construction contracting, and it keeps an office in Las Cruces. Most of our calls here come from hot upstairs rooms, rooms over the garage and attics with ducts running through them, and we see the same kinds of houses in Chaparral and Anthony.
I do every estimate visit myself, and we're known for looking hard at the space before we quote anything. Our crew does the spraying, and I run each job and check it before we leave. I started this business in 2023 after years on another contractor's crews. We're licensed and insured.
The work is backed by our satisfaction guarantee. If you want a straight answer on whether open-cell fits your house, call (575) 222-9021 or send us the form.
Shops, offices and metal buildings get the same check before we quote, with the insulation picked for how the building is used.
A ground cover under the house keeps moisture from the dirt out of the crawl space, which open-cell foam can't do on its own.
We're based in Las Cruces, NM and work across the cities around it, including Chaparral, Anthony and Canutillo, TX. If your city isn't listed here, call and ask.
Open-cell foam insulation in Las Cruces usually costs about $1,800 to $2,700 for 1,000 square feet sprayed 3 inches thick. That's a typical range for planning, not our price. Your number moves with the square footage, the depth and any repairs or old insulation that has to come out first, and your estimate lays each of those out.
Closed-cell is better when you need the most insulation per inch, and open-cell is better when price and quieter rooms matter more. Closed-cell insulates about twice as well per inch, which is part of why it costs more. Open-cell blocks sound much better. Where moisture is the worry, we look at closed-cell foam instead.
Yes, everyone who lives there should be out while the foam is sprayed, according to national safety guidance, and other trades stay away too. Some foam makers recommend waiting 24 hours before you come back, though it can vary by product. Plan a place to stay for the whole family, pets included, and we'll tell you when it's okay to return.
Yes, an attic sealed with foam needs a way to remove moisture, because it no longer has open vents carrying damp air out. That matters more with open-cell, since it doesn't stop vapor on its own, as I covered above. We go over how moisture will be handled in your attic at the estimate, before any foam goes up.
Most of the time goes to the work before the spray: repairs, pulling out old insulation, sealing gaps and any permit the job needs. Spraying is usually the shorter part. Your written estimate puts each step in order, so you can see what comes first and plan your time out of the house around it.
Call (575) 222-9021 or use the form, and know roughly where your heating and cooling unit and ducts sit, since that one detail often decides which foam makes sense.
